PSF Panel Frame Garage Features

Panel frame Garages are one of the most cost effective, simplest and strongest ways to build a Garage/Shed.

Using stud wall framing pre-fabricated frames and trusses are manufactured and supplied to site for ease of erection, perfect for the owner builder or busy builder.

• Standard Spans are 3m, 4.5m, 6m, 7.5m & 9m
• Standard Bay Spaces are 3m
• Standard Heights 2.4m, 2.7m,3.0m, 3.3m & 3.6m

 These standard sizes are the most cost effective, PSF specialize in Non Standard designs, our state of the art Shed-Master® software can design to suit the individual requirements of the owner.

 
Strength

PSF’s garages and sheds are designed to stringent Australian standards by qualified engineers. Different wind ratings (even cyclonic) are achieved by frame thicknesses and spacing of material to suit the area in which the shed is to be built.

Good Looks

100% Australian steel in heavy gauge cladding in both Zincalume® and Colorbond® is used with the option of different cladding and colour styles, this together with all openings flashed and the use of colour coded screws makes the PSF Panel Garage a very attractive building. Many individual choices can be achieved as noted below. 


Slabs

Panel frame garages are designed with a rebate around the edge of the slab. This keeps the bottom of the sheeting below floor level therefore reducing the risk of water, vermin and sharp unsightly edges around the bottom of your garage.

Another excellent feature is added strength by placing our numerous hold down bolts further away from the edge of the slab. It also provides a mowing strip around the outer perimeter of building, roller doors are recessed as well to help prevent water blowing under doors and into shed.

 
Options & Special Designs 

• Roller Doors
• Insulation
• Personal Access (PA) Doors
• Windows & Glass Sliding Doors
• Whirly Birds
• Gable & Skillion Roof Only extensions
• Translucent Roof Sheets
• Internal Wall Framing

Other options are available like different roof pitches to match existing buildings, 600 stud centres & ceiling battens for ease of internal lining. Plus many other options that you may require PSF can even supply frames in flat pack format for transport or tricky access sites. 

PSF Welded Portal Frame Shed Features

Welded Portal frame Sheds are one of the most flexible, rugged and toughest sheds on the market. A cost effective simple and strong way to build a Shed, using a C-section galvanised Portal frame that is plated and welded in our factory prior to delivery on site for ease of erection, perfect for the owner builder or busy builder.

 These standard sizes are the most cost effective, PSF specialize in Non Standard designs, our state of the art Shed-Master® software can design to suit the individual requirements of the owner.

Strength

PSF’s garages and sheds are designed to stringent Australian standards by qualified engineers. Different wind ratings (even cyclonic) are achieved by frame thicknesses and spacing of material to suit the area in which the shed is to be built.

Good Looks

100% Australian steel in heavy gauge cladding in both Zincalume® and Colorbond® is used with the option of different cladding and colour styles, this together with all openings flashed and the use of colour coded screws makes the PSF Portal Frame Building a very attractive building. Many individual choices can be achieved as noted below. 

Slabs & Piers

Portal frame sheds are designed for piers or slabs the slabs are standard with a rebate around the edge of the slab. This keeps the bottom of the sheeting below floor level therefore reducing the risk of water, vermin and sharp unsightly edges around the bottom of your shed. Another excellent feature is added strength by placing our numerous hold down bolts further away from the edge of the slab. It also provides a mowing strip around the outer perimeter of building, roller doors are recessed as well to help prevent water blowing under doors and into shed.

Options & Special Designs  

• Roller Doors
• Insulation
• Metal Sliding Doors
• Open Bays
• Personal Access (PA) Doors
• Windows & Glass Sliding Doors  
  
• Whirly Birds 
• Gable & Skillion Roof Only extensions  
  
• Translucent Roof Sheets
• Internal Wall Framing

Compare Our Features: 

Features	US	OTHERS
Local Australian Company
Quality Australian Products
Pre-Fabricated Frames for ease of construction
Colour Coded screws & Flashings for superior finish
Rebated Slab for greater strength, finish, water & vermin retention
Engineered Plans for Building (Up to W50 as Standard(C4))
Engineer Plans for Slab (Up to ‘E’ design as Standard)
.42BMT Roof sheeting
.42BMT Wall sheeting
All Corners & Openings Flashed for ease of construction & safety
Pre-fabricated Doors & Windows (No need to construct on site)
Complete Kit supplied inc. Gutters, Downpipes & Hold down bolts
Standard 15 Deg Roof Pitch
Experienced Staff
Helpful Staff
Versatile Design Options to suit individual Owner
Option of different Door & Windows
Option for different Cladding & Sheeting  (Horizontal Styles Available)
Option for different Roof Pitches  15 to 25 Degrees

If you have any questions regarding any of our product range please contact us or ask our experienced sales staff on (07) 4634 7099 for more information.